Lipid Profile Meter 4 in 1 Total Cholesterol TC Triglyceride TG High Low Density Lipoprotein HDL Test Analyzer System Monitor

※This product is only used for daily self-monitoring, and its test results cannot be used as a basis for clinical diagnosis, screening and guidance of medication

•Test range:
①TC:2.59mmol/L–10.35mmol/L
(100mg/dL-400mg/dL)
②TG:0.51mmol/L–5.56mmol/L
(45mg/dL-500mg/dL)
③HDL:0.39mmol/L–2.59mmol/L
(15mg/dL-100mg/dL)
④LDL=TC-HDL-TG/2.2mmol/L
(TC-HDL-TG/5mg/dL)
•Sample type:Capillary total blood sample, venous blood
•Sample dosage:About 40μL
••Memory capacity:500 groups
•Test time:<3 minutes
•Analyzer life:5 years

1 Pcs/pack

Compared with box packaging, the validity period is longer

Test Steps:

①Press the power button to start the machine. After starting the machine, long press the power button to enter the main page of the system and select the power button to enter the system setting interface.
②Insert the code card from the side of the instrument.
Note:the flat side of the code card is close to the upper end of the card.
③Make sure the codes on the instrument, the test card box and the single package of the test card are consistent.
④Use disposable blood sampler to collect blood.
Note:after disinfecting with alcohol, take blood after the alcohol evaporates.
⑤Blood collection.
Note:the blood collection vessel is tilted downward to draw blood to the scale line. When the blood volume is insufficient, the blood collection tube is laid flat and the blood is collected after the blood sample is sufficient. During the blood collection, bubbles are avoided as much as possible.
⑥Insert test card under the instrument.
⑦Add a blood sample. 
•When the symbol of blood drops flashes, add blood sample.Squeeze the upper end of the blood vessel with your finger so that the blood sample comes out of the vessel and is added at one time.
•Blood vessels should not touch the test card.
⑧Two minutes or so display the results.
Reference values:
TC < 5.17mmol/L
TG < 1.70mmol/L
HDL > 1.04mmol/L